Welded Wire Mesh(50) - List of Manufacturers, Suppliers, Companies and Products

Welded Wire Mesh Product List

1～7 item / All 7 items

Displayed results
Welded wire mesh

Welded wire mesh

It is a wire mesh with vertical and horizontal lines arranged at right angles and the intersections welded with electrical resistance.

Welded wire mesh can withstand large loads even with thin wire diameters, as the load weight is evenly distributed across each weld point. In addition to JIS standard products, welded wire mesh can be manufactured in combinations that are too difficult to produce with woven wire mesh due to excessively thin wire diameters (for example, a 4 mesh with a wire diameter of 0.5mm or a 1/2 inch mesh with a wire diameter of 1.6mm). The most common use is for reinforcing concrete structures. It helps prevent the occurrence of cracks in concrete and minimizes them if they do occur. Additionally, welded wire mesh is used for other applications such as coated or vinyl-covered displays (for decoration), baskets, and transport wagons. 【Specifications】 ○ Material: Iron wire, galvanized iron wire, welded and then galvanized, stainless steel wire, etc. ○ Mesh and wire diameter: Square mesh, rectangular mesh, with different wire diameters for vertical and horizontal lines ○ Dimensions: Width 2.5m or less, Length standard product 30m For more details, please contact us or download the catalog.

  • Flag hardware and decorative hardware
  • wagon
  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welded Wire Mesh "Super Cross Mesh"

Welded Wire Mesh "Super Cross Mesh"

Created by overlapping vertical and horizontal lines at right angles and using electric resistance welding! A mesh that eliminates thickness!

"Super Cross Mesh" is a mesh that has been welded flat at the intersections, eliminating thickness. Because the weight load is evenly distributed at the weld points, it can withstand large weight loads even when using thin wires. The complete coating without seams provides high durability. Its high strength also allows for good handling, making it suitable for a wide range of applications. [Features] - Mesh with flat welded intersections, eliminating thickness - High durability due to complete coating without seams - High strength allows for good handling and versatility in applications *For more details, please refer to the PDF document or feel free to contact us.

  • Gates, walls and fences
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welded wire mesh "CD Mesh"

Welded wire mesh "CD Mesh"

By reducing the number of horizontal and vertical lines, the weight per sheet becomes lighter!

The "CD Mesh" is a welded wire mesh made using deformed steel wire (JIS G 3532) with ribs attached at room temperature to soft steel wire (JIS G 3505). When this product is used in synthetic slabs, it has been confirmed to meet the criteria for a 2-hour fire resistance performance standard. *Reference: Fire resistance performance test and business method document 4.1 Fire resistance performance test and evaluation method. By reducing the number of horizontal and vertical wires, the weight per sheet is lighter, and because it uses deformed steel wire, adhesion to concrete is improved. 【Features】 ■ The number of horizontal and vertical wires can be reduced, resulting in a lighter weight per sheet. ■ Improved adhesion to concrete due to the use of deformed steel wire. ■ The extension bars and additional bars at the protruding parts allow for secure joint anchoring, reducing the overlap of the mesh and minimizing the required quantity. ■ Eliminating the need for four layers ensures sufficient cover thickness. *For more details, please refer to the PDF document or feel free to contact us.

  • Aluminum fence/Iron fence

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welded Wire Mesh "High Strength Screw Mesh"

Welded Wire Mesh "High Strength Screw Mesh"

Enhance the adhesion rate of concrete! Achieve high strength and lightweight! Welded wire mesh with excellent safety.

The "High-Strength Screw Mesh" is a welded wire mesh that achieves strength, lightness, high adhesion rate, and high safety. Square cross-section iron wires are twisted once at intervals of 150mm or less. These iron wires are called screw bars. Compared to the iron wires used in existing "wire mesh," the tensile strength has been improved by 10%. It is lightweight and has rounded corners, making it excellent for safety and fluidity in work. 【Features】 ■ Iron wire with a square cross-section twisted once at intervals of 150mm or less ■ 10% improvement in tensile strength ■ Manufactured from square bars with the same side length as the diameter of conventional round bar materials, achieving weight reduction ■ Excellent safety and fluidity in work ■ Adhesion of concrete is improved by four times compared to conventional wire mesh *For more details, please refer to the PDF document or feel free to contact us.

  • Aluminum fence/Iron fence
  • Secondary steel products
  • Reinforced concrete structural systems (including PCa)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welded Wire Mesh "High Strength Screw Mesh"

Welded Wire Mesh "High Strength Screw Mesh"

This is a new era of wire mesh that achieves "strength," "lightness," "high adhesion rate," and "high safety."

The "High-Strength Screw Mesh" is a welded wire mesh that achieves weight reduction by being manufactured from square bars with sides equal to the diameter, instead of traditional round bar materials. It makes contact with the concrete on four sides and is further twisted, resulting in a high adhesion rate. Concrete using this product is expected to have better crack prevention. Additionally, the corners are rounded, making it less likely to snag on gloves during installation, which is effective in preventing injuries. 【Features】 ■ Lightweight ■ Strong ■ High adhesion rate ■ High safety ■ Achieves weight reduction by being manufactured from square bars with sides equal to the diameter *For more details, please refer to the PDF document or feel free to contact us.

  • Fences, screens, and partitions

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welded wire mesh

Welded wire mesh

Reduce the amount of steel and concrete! An economical reinforcement material that withstands heavy loads and prevents the occurrence of cracks.

"Wired mesh" is a welded wire mesh that can withstand larger loads compared to other reinforcement materials, prevents the occurrence of cracks, and reduces repair costs. It enhances the strength of concrete and can reduce the thickness of walls and floors. It has a significant effect on reducing weight required for high-rise buildings. Using iron wire or deformed bars, it comes in a wide variety of mesh sizes, from standard to custom-made. You can use the suitable type as structural or reinforcing bars according to your application. 【Features】 ■ JIS G 3551 Certification Number QA0606001 ■ Economical reinforcement material ■ Reduces the amount of steel and concrete ■ Shortens working time ■ Abundant variety available *For more details, please refer to the PDF document or feel free to contact us.

  • Aluminum fence/Iron fence
  • Secondary steel products
  • Reinforced concrete structural systems (including PCa)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welded Wire Mesh "Hyper Pre-Mesh"

Welded Wire Mesh "Hyper Pre-Mesh"

Introducing pre-galvanized welded wire mesh using molten zinc-10% aluminum alloy coated iron wire!

"Hyper Pre-Mesh" is a welded wire mesh manufactured by welding using wire produced by a continuous molten coating method. The material used contains more than 10% aluminum in the coating layer and employs molten zinc-10% aluminum alloy coated iron wire with a coating weight of over 300g/m2. The strong oxide film formed by the aluminum component on the surface of the coating layer suppresses corrosion, and due to the thick pure coating layer with corrosion resistance, it demonstrates excellent durability. 【Features】 ■ Stable wire mesh strength, coating characteristics, and dimensional accuracy ■ Composed of commonly used steel materials ■ High impact resistance against shocks during normal handling of construction and civil engineering materials ■ Excellent durability in soil and air ■ Simplified manufacturing process *For more details, please refer to the PDF document or feel free to contact us.

  • Aluminum fence/Iron fence

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Welded Wire Mesh

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.